Building a Playhouse – How to Design a Playhouse for Your Kids – Small House DIY

Building a Playhouse – How to Design a Playhouse for Your Kids

Posted on August 11, 2017 By

Before you can create a playhouse for your kids, a person obviously need a plan. Without a plan you’ll stumble together, making random cuts and throwing away your time and money on mistakenly cut lumber. But how plus where do you get a style and a plan?

Let’s encounter it, most of us are just regular men or gals without a diploma in architecture, right? So how can we design and build a playhouse?

One way to get a creative juices flowing is to study other playhouses. Whether on-line or in person, look at and research as many playhouse designs as you can. If you are lucky enough to see a few in person, take a measuring recording with you and physically measure the elevation and widths. Get a really feel for how big a playhouse ought to be and how big you want yours to be.

As a good general guideline, an average sized playhouse should be regarding 50-100 square feet in ground area. The walls need not end up being over 6′ tall, as most youngsters are about 4 to 4-1/2 ft tall.

If you’re a beginner woodworker, keep the design simple. The square or simple rectangle will be the safest bet. Don’t try to get all fancy with an excessively elaborate design. You may get bogged down halfway through and give upward. Better to keep it simple and full it.

Design your playhouse along with a gable roof. A gable roof is the easiest to create and still looks good on a simple structure. The pitch or even angle of the roof should be one to 2 . In other phrases for every 12″ the rise should be 6″. This can make it easier to figure the shape height.

For siding, use T-111 plywood turned horizontally. This provides the impression of lap siding, yet is quicker and cheaper. When using this method, keep your wall lengths 8′ or less, as plywood house comes in that length standard.

Build a front door out of either fuller plywood or 1×6 boards. You can get some basic strap handles from a hardware store to allow it to swing. If you design the walls 6′ tall, make the door 5′ or even 5′-6″ tall.

Don’t try to use a regular door button for the playhouse door. They’re made for a standard doorway which is thicker than the door you can building. Just use a hasp or slide bolt. Or you can opt for no knob in any way!

Finally, design your playhouse along with a few windows. Make all of them about 18″ square as this will appear better as far as the proportion to the rest of the playhouse.

So you need to check out other playhouses, and get notes. Sketch your ideas on a few blank paper. I like to make use of graph paper with 1/4″ pieces. Spend some time tweaking and mastering your design. Once you get this the way you want it, you’re ready to start building!

Building A PlayhousePlayhouse Building TipsPlayhouse Construction     , ,